Sunnyvale, CA On-site
Full-time · Entry level
10,001+ employees · Defense and Space Manufacturing
Job Description: Prepare and connect apparatus for tests and operate test facilities and controls to perform static tests on a variety of turbine and auxiliary products where methods, sequences and tooling are normally established. Work with and/or assist journey level testers as required.
Qualify, secure, and maintain a security clearance for all tester functions.
Receive work assignment from supervision and instruction from Test Engineer. - Read and follow safety regulations and procedures and MI package including drawings, change notices, operation sheets, specifications and work authorizations - Position and mount apparatus on pedestals and stands, assemble and bolt together components, tests plates, adapters, fixtures, hoses, fittings and piping. Cut and install gaskets as necessary and connect specified steam, water, air and oil lines and gauges for static testing turbines and auxiliary components.
Disassemble after testing is completed - Start, operate and monitor test facilities such as pumps, valves, low pressure steam generating equipment and associated auxiliaries (feed water system, cooling water and condensate system, etc.) heat exchangers and water treatment units to maintain the power, steam, water and oil required to static test products
Operate test stand controls to maintain specified pressures, temperatures, and flows to static test a variety of products. Visually check for leaks during test and continually review test data to insure results are within the parameters of the specification and operating policies
Start and operate pickling equipment to clean various castings, fabrications and parts
Assemble and connect products for testing, operate controls, and assist in conducting routine dynamic tests of products under the direction of a higher level tester
Maintain inventory of instruments and gauges and have them calibrated at specified times
Observe safe operating practices and maintain familiarity with emergency shutdown procedure
Make proper time charge entries and record data as required
Maintain tools, equipment and work area in a clean and orderly condition
Perform other work of equal or lower classification as required.
Basic Qualification
Experience with the operation of commercial and/or industrial fluid systems, such as Fluid and Electrical Systems
Must be able to obtain and maintain a government issued security clearance Must be able to obtain a stationary operating engineer license
Ability to work any shift
H.S. Diploma or GED
Preferred Qualifications
Must be able to qualify for and maintain all required watch stations
Experience with steam plant operations either onboard a U.S. Navy vessel or within a commercial facility
Active security clearance
Strong mechanical aptitude, ability to quickly learn and develop skills
Excellent motivation to provide an individual contribution to the team
Develop and expertise and become a technical expert in particular areas within the department
Stationary steam plant operating engineer license
Strong troubleshooting background on steam plant equipment
Full-time · Entry level
10,001+ employees · Defense and Space Manufacturing
Job Description: Prepare and connect apparatus for tests and operate test facilities and controls to perform static tests on a variety of turbine and auxiliary products where methods, sequences and tooling are normally established. Work with and/or assist journey level testers as required.
Qualify, secure, and maintain a security clearance for all tester functions.
Receive work assignment from supervision and instruction from Test Engineer. - Read and follow safety regulations and procedures and MI package including drawings, change notices, operation sheets, specifications and work authorizations - Position and mount apparatus on pedestals and stands, assemble and bolt together components, tests plates, adapters, fixtures, hoses, fittings and piping. Cut and install gaskets as necessary and connect specified steam, water, air and oil lines and gauges for static testing turbines and auxiliary components.
Disassemble after testing is completed - Start, operate and monitor test facilities such as pumps, valves, low pressure steam generating equipment and associated auxiliaries (feed water system, cooling water and condensate system, etc.) heat exchangers and water treatment units to maintain the power, steam, water and oil required to static test products
Operate test stand controls to maintain specified pressures, temperatures, and flows to static test a variety of products. Visually check for leaks during test and continually review test data to insure results are within the parameters of the specification and operating policies
Start and operate pickling equipment to clean various castings, fabrications and parts
Assemble and connect products for testing, operate controls, and assist in conducting routine dynamic tests of products under the direction of a higher level tester
Maintain inventory of instruments and gauges and have them calibrated at specified times
Observe safe operating practices and maintain familiarity with emergency shutdown procedure
Make proper time charge entries and record data as required
Maintain tools, equipment and work area in a clean and orderly condition
Perform other work of equal or lower classification as required.
Basic Qualification
Experience with the operation of commercial and/or industrial fluid systems, such as Fluid and Electrical Systems
Must be able to obtain and maintain a government issued security clearance Must be able to obtain a stationary operating engineer license
Ability to work any shift
H.S. Diploma or GED
Preferred Qualifications
Must be able to qualify for and maintain all required watch stations
Experience with steam plant operations either onboard a U.S. Navy vessel or within a commercial facility
Active security clearance
Strong mechanical aptitude, ability to quickly learn and develop skills
Excellent motivation to provide an individual contribution to the team
Develop and expertise and become a technical expert in particular areas within the department
Stationary steam plant operating engineer license
Strong troubleshooting background on steam plant equipment
Sunnyvale, CA On-site
Full-time · Entry level
10,001+ employees · Defense and Space Manufacturing
Job Description: Prepare and connect apparatus for tests and operate test facilities and controls to perform static tests on a variety of turbine and auxiliary products where methods, sequences and tooling are normally established. Work with and/or assist journey level testers as required.
Qualify, secure, and maintain a security clearance for all tester functions.
Receive work assignment from supervision and instruction from Test Engineer. - Read and follow safety regulations and procedures and MI package including drawings, change notices, operation sheets, specifications and work authorizations - Position and mount apparatus on pedestals and stands, assemble and bolt together components, tests plates, adapters, fixtures, hoses, fittings and piping. Cut and install gaskets as necessary and connect specified steam, water, air and oil lines and gauges for static testing turbines and auxiliary components.
Disassemble after testing is completed - Start, operate and monitor test facilities such as pumps, valves, low pressure steam generating equipment and associated auxiliaries (feed water system, cooling water and condensate system, etc.) heat exchangers and water treatment units to maintain the power, steam, water and oil required to static test products
Operate test stand controls to maintain specified pressures, temperatures, and flows to static test a variety of products. Visually check for leaks during test and continually review test data to insure results are within the parameters of the specification and operating policies
Start and operate pickling equipment to clean various castings, fabrications and parts
Assemble and connect products for testing, operate controls, and assist in conducting routine dynamic tests of products under the direction of a higher level tester
Maintain inventory of instruments and gauges and have them calibrated at specified times
Observe safe operating practices and maintain familiarity with emergency shutdown procedure
Make proper time charge entries and record data as required
Maintain tools, equipment and work area in a clean and orderly condition
Perform other work of equal or lower classification as required.
Basic Qualification
Experience with the operation of commercial and/or industrial fluid systems, such as Fluid and Electrical Systems
Must be able to obtain and maintain a government issued security clearance Must be able to obtain a stationary operating engineer license
Ability to work any shift
H.S. Diploma or GED
Preferred Qualifications
Must be able to qualify for and maintain all required watch stations
Experience with steam plant operations either onboard a U.S. Navy vessel or within a commercial facility
Active security clearance
Strong mechanical aptitude, ability to quickly learn and develop skills
Excellent motivation to provide an individual contribution to the team
Develop and expertise and become a technical expert in particular areas within the department
Stationary steam plant operating engineer license
Strong troubleshooting background on steam plant equipment
0 Comments
0 Shares
Arabic
French
Spanish
Portuguese
Deutsch
Turkish
Dutch
Italiano
Russian
Romaian
Portuguese (Brazil)
Greek